Petrochemical plant in written the Kingdom of Saudi Arabia

Petrochemicals (sometimes abbreviated as petchems[1]) are the chemical products obtained from petroleum by refining. Some chemical compounds made from petroleum are also obtained from other fossil fuels, such as coal or natural gas, or renewable sources such as maize, palm fruit or sugar cane.

The two most common petrochemical classes are olefins (including ethylene and propylene) and aromatics (including benzene, toluene and xylene isomers).

Oil refineries produce olefins and aromatics by fluid catalytic cracking of petroleum fractions. Chemical plants produce olefins by steam cracking of natural gas liquids like ethane and propane. Aromatics are produced by catalytic reforming of naphtha. Olefins and aromatics are the building-blocks for a wide range of materials such as solvents, detergents, and adhesives. Olefins are the basis for polymers and oligomers used in plastics, resins, fibers, elastomers, lubricants, and gels.[2][3]

Global ethylene production was 190 million tonnes and propylene was 120 million tonnes in 2019.[4] Aromatics production is approximately 70 million tonnes. The largest petrochemical industries are located in the USA and Western Europe; however, major growth in new production capacity is in the Middle East and Asia. There is substantial inter-regional petrochemical trade.

Primary petrochemicals are divided into three groups depending on their chemical structure:

In 2007, the amounts of ethylene and propylene produced in steam crackers were about 115 Mt (megatonnes) and 70 Mt, respectively.[8] The output ethylene capacity of large steam crackers ranged up to as much as 1.0 – 1.5 Mt per year.[9]

The adjacent diagram schematically depicts the major hydrocarbon sources and processes used in producing petrochemicals.[2][3][10][11]

Petrochemical feedstock sources

Like commodity chemicals, petrochemicals are made on a very large scale. Petrochemical manufacturing units differ from commodity chemical plants in that they often produce a number of related products. Compare this with specialty chemical and fine chemical manufacture where products are made in discrete batch processes.

Petrochemicals are predominantly made in a few manufacturing locations around the world, for example in Jubail & Yanbu Industrial Cities in Saudi Arabia, Texas & Louisiana in the US, in Teesside in the Northeast of England in the United Kingdom, in Rotterdam in the Netherlands, in Jamnagar, Dahej in Gujarat, India and in Singapore. Not all of the petrochemical or commodity chemical materials produced by the chemical industry are made in one single location but groups of related materials are often made in adjacent manufacturing plants to induce industrial symbiosis as well as material and utility efficiency and other economies of scale. This is known in chemical engineering terminology as integrated manufacturing. Specialty and fine chemical companies are sometimes found in similar manufacturing locations as petrochemicals but, in most cases, they do not need the same level of large-scale infrastructure (e.g., pipelines, storage, ports, and power, etc.) and therefore can be found in multi-sector business parks.

The large scale petrochemical manufacturing locations have clusters of manufacturing units that share utilities and large scale infrastructures such as power stations, storage tanks, port facilities, road and rail terminals. In the United Kingdom, for example, there are 4 main locations for such manufacturing: near the River Mersey in North West England, on the Humber on the East coast of Yorkshire, in Grangemouth near the Firth of Forth in Scotland, and in Teesside as part of the Northeast of England Process Industry Cluster (NEPIC). To demonstrate the clustering and integration, some 50% of the United Kingdom's petrochemical and commodity chemicals are produced by the NEPIC industry cluster companies in Teesside.

  1. ^ Kiesche, Liz, "Royal Dutch Shell may take 50% stake in $9B Indian petchem project", Reuters via Seeking Alpha, August 12, 2020. Retrieved 2020-08-12.
  2. ^ a b Sami Matar and Lewis F. Hatch (2001). Chemistry of Petrochemical Processes. Gulf Professional Publishing. ISBN 0-88415-315-0.
  3. ^ a b Staff (March 2001). "Petrochemical Processes 2001". Hydrocarbon Processing: 71–246. ISSN 0887-0284.
  4. ^,to%20283%20million%20metric%20tons.
  5. ^ Rodrigues, Victor de O.; Faro Júnior, Arnaldo C. (2012-09-05). "On catalyst activation and reaction mechanisms in propane aromatization on Ga/HZSM5 catalysts". Applied Catalysis A: General. 435–436: 68–77. doi:10.1016/j.apcata.2012.05.036. ISSN 0926-860X.
  6. ^ Song, Changyeol; Gim, Min Yeong; Lim, Yong Hyun; Kim, Do Heui (2019-09-01). "Enhanced yield of benzene, toulene, and xylene from the co-aromatization of methane and propane over gallium supported on mesoporous ZSM-5 and ZSM-11". Fuel. 251: 404–412. doi:10.1016/j.fuel.2019.04.079. ISSN 0016-2361.
  7. ^ Akhtar, M. N.; Al-Yassir, N.; Al-Khattaf, S.; Čejka, Jiří (2012-01-05). "Aromatization of alkanes over Pt promoted conventional and mesoporous gallosilicates of MEL zeolite". Catalysis Today. The 4th Czech-Italian-Spanish (CIS-4) workshop on Molecular Sieves and Catalysis. 179 (1): 61–72. doi:10.1016/j.cattod.2011.06.036. ISSN 0920-5861.
  8. ^ Hassan E. Alfadala, G.V. Rex Reklaitis and Mahmoud M. El-Halwagi (Editors) (2009). Proceedings of the 1st Annual Gas Processing Symposium, Volume 1: January, 2009 – Qatar (1st ed.). Elsevier Science. pp. 402–414. ISBN 978-0-444-53292-3.CS1 maint: extra text: authors list (link)
  9. ^ Steam Cracking: Ethylene Production (PDF page 3 of 12 pages)
  10. ^ SBS Polymer Supply Outlook
  11. ^ Jean-Pierre Favennec (Editor) (2001). Petroleum Refining: Refinery Operation and Management. Editions Technip. ISBN 2-7108-0801-3.CS1 maint: extra text: authors list (link)